readprofile Man page

Resume Wikipedia de Util-linux

util-linux (avec un « u » minuscule) est un paquet standard des systèmes d’exploitation Linux. Il comporte les utilitaires suivants :
/sbin/fstrim, une application de la commande TRIM
/sbin/hwclock, interroger et régler l’horloge matérielle (HTR)
/usr/bin/line (déprécié)

READPROFILE(8) System Administration READPROFILE(8)


readprofile – read kernel profiling information


readprofile [options]

This manpage documents version 2.0 of the program.


The readprofile command uses the /proc/profile information to print
ascii data on standard output. The output is organized in three col‐
umns: the first is the number of clock ticks, the second is the name of
the C function in the kernel where those many ticks occurred, and the
third is the normalized `load’ of the procedure, calculated as a ratio
between the number of ticks and the length of the procedure. The out‐
put is filled with blanks to ease readability.


-a, –all
Print all symbols in the mapfile. By default the procedures
with reported ticks are not printed.

-b, –histbin
Print individual histogram-bin counts.

-i, –info
Info. This makes readprofile only print the profiling step used
by the kernel. The profiling step is the resolution of the pro‐
filing buffer, and is chosen during kernel configuration
(through `make config’), or in the kernel’s command line. If
the -t (terse) switch is used together with -i only the decimal
number is printed.

-m, –mapfile mapfile
Specify a mapfile, which by default is /usr/src/linux/Sys‐ You should specify the map file on cmdline if your
current kernel isn’t the last one you compiled, or if you keep elsewhere. If the name of the map file ends with
`.gz’ it is decompressed on the fly.

-M, –multiplier multiplier
On some architectures it is possible to alter the frequency at
which the kernel delivers profiling interrupts to each CPU.
This option allows you to set the frequency, as a multiplier of
the system clock frequency, HZ. This is supported on i386-SMP
(2.2 and 2.4 kernel) and also on sparc-SMP and sparc64-SMP (2.4
kernel). This option also resets the profiling buffer, and
requires superuser privileges.

-p, –profile pro-file
Specify a different profiling buffer, which by default is
/proc/profile. Using a different pro-file is useful if you want
to `freeze’ the kernel profiling at some time and read it later.
The /proc/profile file can be copied using `cat’ or `cp’. There
is no more support for compressed profile buffers, like in read‐
profile-1.1, because the program needs to know the size of the
buffer in advance.

-r, –reset
Reset the profiling buffer. This can only be invoked by root,
because /proc/profile is readable by everybody but writable only
by the superuser. However, you can make readprofile setuid 0,
in order to reset the buffer without gaining privileges.

-s, –counters
Print individual counters within functions.

-v, –verbose
Verbose. The output is organized in four columns and filled
with blanks. The first column is the RAM address of a kernel
function, the second is the name of the function, the third is
the number of clock ticks and the last is the normalized load.

-V, –version
Display version information and exit.

-h, –help
Display help text and exit.

Browse the profiling buffer ordering by clock ticks:
readprofile | sort -nr | less

Print the 20 most loaded procedures:
readprofile | sort -nr +2 | head -20

Print only filesystem profile:
readprofile | grep _ext2

Look at all the kernel information, with ram addresses:
readprofile -av | less

Browse a `freezed’ profile buffer for a non current kernel:
readprofile -p ~/profile.freeze -m /

Request profiling at 2kHz per CPU, and reset the profiling buffer:
sudo readprofile -M 20


readprofile only works with an 1.3.x or newer kernel, because
/proc/profile changed in the step from 1.2 to 1.3

This program only works with ELF kernels. The change for a.out kernels
is trivial, and left as an exercise to the a.out user.

To enable profiling, the kernel must be rebooted, because no profiling
module is available, and it wouldn’t be easy to build. To enable pro‐
filing, you can specify “profile=2” (or another number) on the kernel
commandline. The number you specify is the two-exponent used as pro‐
filing step.

Profiling is disabled when interrupts are inhibited. This means that
many profiling ticks happen when interrupts are re-enabled. Watch out
for misleading information.

/proc/profile A binary snapshot of the profiling buffer.
/usr/src/linux/ The symbol table for the kernel.
/usr/src/linux/* The program being profiled 🙂

The readprofile command is part of the util-linux package and is avail‐
able from Linux Kernel Archive ⟨

util-linux October 2011 READPROFILE(8)