XCALC(1) General Commands Manual XCALC(1)
xcalc – scientific calculator for X
xcalc [-stipple] [-rpn] [-toolkitoption…]
xcalc is a scientific calculator desktop accessory that can emulate a
TI-30 or an HP-10C.
xcalc accepts all of the standard toolkit command line options along
with two additional options:
This option indicates that the background of the calculator
should be drawn using a stipple of the foreground and back‐
ground colors. On monochrome displays improves the appearance.
-rpn This option indicates that Reverse Polish Notation should be
used. In this mode the calculator will look and behave like an
HP-10C. Without this flag, it will emulate a TI-30.
Pointer Usage: Operations may be performed with pointer button 1, or in
some cases, with the keyboard. Many common calculator operations have
keyboard accelerators. To quit, press pointer button 3 on the AC key
of the TI calculator, or the ON key of the HP calculator.
Calculator Key Usage (TI mode): The numbered keys, the +/- key, and the
+, -, *, /, and = keys all do exactly what you would expect them to.
It should be noted that the operators obey the standard rules of prece‐
dence. Thus, entering “3+4*5=” results in “23”, not “35”. The paren‐
theses can be used to override this. For example, “(1+2+3)*(4+5+6)=”
results in “6*15=90″.
The entire number in the calculator display can be selected, in order
to paste the result of a calculation into text.
The action procedures associated with each function are given below.
These are useful if you are interested in defining a custom calculator.
The action used for all digit keys is digit(n), where n is the corre‐
sponding digit, 0..9.
1/x Replaces the number in the display with its reciprocal. The
corresponding action procedure is reciprocal().
x^2 Squares the number in the display. The corresponding action
procedure is square().
SQRT Takes the square root of the number in the display. The cor‐
responding action procedure is squareRoot().
CE/C When pressed once, clears the number in the display without
clearing the state of the machine. Allows you to re-enter a
number if you make a mistake. Pressing it twice clears the
state, also. The corresponding action procedure for TI mode
AC Clears the display, the state, and the memory. Pressing it
with the third pointer button turns off the calculator, in
that it exits the program. The action procedure to clear the
state is off(); to quit, quit().
INV Invert function. See the individual function keys for
details. The corresponding action procedure is inverse().
sin Computes the sine of the number in the display, as inter‐
preted by the current DRG mode (see DRG, below). If
inverted, it computes the arcsine. The corresponding action
procedure is sine().
cos Computes the cosine, or arccosine when inverted. The corre‐
sponding action procedure is cosine().
tan Computes the tangent, or arctangent when inverted. The cor‐
responding action procedure is tangent().
DRG Changes the DRG mode, as indicated by ‘DEG’, ‘RAD’, or ‘GRAD’
at the bottom of of the calculator “liquid crystal” dis‐
play. When in ‘DEG’ mode, numbers in the display are taken
as being degrees. In ‘RAD’ mode, numbers are in radians, and
in ‘GRAD’ mode, numbers are in grads. When inverted, the DRG
key has a feature of converting degrees to radians to grads
and vice-versa. Example: put the calculator into ‘DEG’
mode, and enter “45 INV DRG”. The display should now show
something along the lines of “.785398”, which is 45 degrees
converted to radians. The corresponding action procedure is
e The constant ‘e’. (2.7182818…). The corresponding action
procedure is e().
EE Used for entering exponential numbers. For example, to get
“-2.3E-4” you’d enter “2 . 3 +/- EE 4 +/-“. The correspond‐
ing action procedure is scientific().
log Calculates the log (base 10) of the number in the display.
When inverted, it raises “10.0” to the number in the display.
For example, entering “3 INV log” should result in “1000”.
The corresponding action procedure is logarithm().
ln Calculates the log (base e) of the number in the display.
When inverted, it raises “e” to the number in the display.
For example, entering “e ln” should result in “1”. The cor‐
responding action procedure is naturalLog().
y^x Raises the number on the left to the power of the number on
the right. For example “2 y^x 3 =” results in “8”, which is
2^3. For a further example, “(1+2+3) y^x (1+2) =” equals “6
y^x 3” which equals “216”. The corresponding action proce‐
dure is power().
PI The constant ‘pi’. (3.1415927….) The corresponding action
procedure is pi().
x! Computes the factorial of the number in the display. The
number in the display must be an integer in the range 0-500,
though, depending on your math library, it might overflow
long before that. The corresponding action procedure is fac‐
( Left parenthesis. The corresponding action procedure for TI
calculators is leftParen().
) Right parenthesis. The corresponding action procedure for TI
calculators is rightParen().
/ Division. The corresponding action procedure is divide().
* Multiplication. The corresponding action procedure is multi‐
– Subtraction. The corresponding action procedure is sub‐
+ Addition. The corresponding action procedure is add().
= Perform calculation. The TI-specific action procedure is
STO Copies the number in the display to the memory location. The
corresponding action procedure is store().
RCL Copies the number from the memory location to the display.
The corresponding action procedure is recall().
SUM Adds the number in the display to the number in the memory
location. The corresponding action procedure is sum().
EXC Swaps the number in the display with the number in the memory
location. The corresponding action procedure for the TI cal‐
culator is exchange().
+/- Negate; change sign. The corresponding action procedure is
. Decimal point. The action procedure is decimal().
Calculator Key Usage (RPN mode): The number keys, CHS (change sign), +,
-, *, /, and ENTR keys all do exactly what you would expect them to do.
Many of the remaining keys are the same as in TI mode. The differences
are detailed below. The action procedure for the ENTR key is enter().
<- This is a backspace key that can be used if you make a mis‐ take while entering a number. It will erase digits from the display. (See BUGS). Inverse backspace will clear the X register. The corresponding action procedure is back(). ON Clears the display, the state, and the memory. Pressing it with the third pointer button turns off the calculator, in that it exits the program. To clear state, the action proce‐ dure is off; to quit, quit(). INV Inverts the meaning of the function keys. This would be the f key on an HP calculator, but xcalc does not display multi‐ ple legends on each key. See the individual function keys for details. 10^x Raises "10.0" to the number in the top of the stack. When inverted, it calculates the log (base 10) of the number in the display. The corresponding action procedure is ten‐ power(). e^x Raises "e" to the number in the top of the stack. When inverted, it calculates the log (base e) of the number in the display. The action procedure is epower(). STO Copies the number in the top of the stack to a memory loca‐ tion. There are 10 memory locations. The desired memory is specified by following this key with a digit key. RCL Pushes the number from the specified memory location onto the stack. SUM Adds the number on top of the stack to the number in the specified memory location. x:y Exchanges the numbers in the top two stack positions, the X and Y registers. The corresponding action procedure is Xex‐ changeY(). R v Rolls the stack downward. When inverted, it rolls the stack upward. The corresponding action procedure is roll(). blank These keys were used for programming functions on the HP-10C. Their functionality has not been duplicated in xcalc. Finally, there are two additional action procedures: bell(), which rings the bell; and selection(), which performs a cut on the entire number in the calculator's ``liquid crystal'' display. ACCELERATORS Accelerators are shortcuts for entering commands. xcalc provides some sample keyboard accelerators; also users can customize accelerators. The numeric keypad accelerators provided by xcalc should be intuitively correct. The accelerators defined by xcalc on the main keyboard are given below: TI Key HP Key Keyboard Accelerator TI Function HP Function ───────────────────────────────────────────────────────────────────── SQRT SQRT r squareRoot() squareRoot() AC ON space clear() clear() AC <- Delete clear() back() AC <- Backspace clear() back() AC <- Control-H clear() back() AC Clear clear() AC ON q quit() quit() AC ON Control-C quit() quit() INV i i inverse() inverse() sin s s sine() sine() cos c c cosine() cosine() tan t t tangent() tangent() DRG DRG d degree() degree() e e e() ln ln l naturalLog() naturalLog() y^x y^x ^ power() power() PI PI p pi() pi() x! x! ! factorial() factorial() ( ( leftParen() ) ) rightParen() / / / divide() divide() * * * multiply() multiply() - - - subtract() subtract() + + + add() add() = = equal() 0..9 0..9 0..9 digit() digit() +/- CHS n negate() negate() x:y x XexchangeY() ENTR Return enter() ENTR Linefeed enter() CUSTOMIZATION The application class name is XCalc. xcalc has an enormous application defaults file which specifies the position, label, and function of each key on the calculator. It also gives translations to serve as keyboard accelerators. Because these resources are not specified in the source code, you can create a cus‐ tomized calculator by writing a private application defaults file, using the Athena Command and Form widget resources to specify the size and position of buttons, the label for each button, and the function of each button. The foreground and background colors of each calculator key can be individually specified. For the TI calculator, a classical color resource specification might be: XCalc.ti.Command.background: gray50 XCalc.ti.Command.foreground: white For each of buttons 20, 25, 30, 35, and 40, specify: XCalc.ti.button20.background: black XCalc.ti.button20.foreground: white For each of buttons 22, 23, 24, 27, 28, 29, 32, 33, 34, 37, 38, and 39: XCalc.ti.button22.background: white XCalc.ti.button22.foreground: black WIDGET HIERARCHY In order to specify resources, it is useful to know the hierarchy of the widgets which compose xcalc. In the notation below, indentation indicates hierarchical structure. The widget class name is given first, followed by the widget instance name. XCalc xcalc Form ti or hp (the name depends on the mode) Form bevel Form screen Label M Toggle LCD Label INV Label DEG Label RAD Label GRAD Label P Command button1 Command button2 Command button3 and so on, ... Command button38 Command button39 Command button40 APPLICATION RESOURCES rpn (Class Rpn) Specifies that the rpn mode should be used. The default is TI mode. stipple (Class Stipple) Indicates that the background should be stippled. The default is ``on'' for monochrome displays, and ``off'' for color dis‐ plays. cursor (Class Cursor) The name of the symbol used to represent the pointer. The default is ``hand2''. COLORS If you would like xcalc to use its ti colors, include the following in the #ifdef COLOR section of the file you read with xrdb: *customization: -color This will cause xcalc to pick up the colors in the app-defaults color customization file: /etc/X11/app-defaults/XCalc-color.
X(7), xrdb(1), the Athena Widget Set
HP mode is not completely debugged. In particular, the stack is not
handled properly after errors.
Copyright 1994 X Consortium
See X(7) for a full statement of rights and permissions.
John Bradley, University of Pennsylvania
Mark Rosenstein, MIT Project Athena
Donna Converse, MIT X Consortium
X Version 11 xcalc 1.0.6 XCALC(1)